Blesnyuk Zh. V., Likhitskyi O. O., Glushanets V. A.

CLINICAL AND EXPERIMENTAL MEDICINE

Scentific article

Fibrous dysplasia is a pathological condition, the symptoms of which are the occurrence of pathological fractures and bone deformities. The article highlights the advantages of the technique of virtual surgical planning and the prospects of using CAD/CAM technology in the treatment of monoosseous fibrous dysplasia of the mandible. Information technology and additive manufacturing tools allow you to convert digital images obtained from various visualization tools into high-resolution models using CAD/CAM. This technique includes computed tomography, reverse engineering, and rapid prototyping in the production of individual implants for maxillofacial surgery. The design and fabrication process consists of processing medical image data of pathologically altered tissues of the patient’s maxillofacial area with a symmetrical part to build a three-dimensional (3D) digital model, defect side imaging, where different techniques are used for individual cases, including mirroring pathologically unchanged side. Further design of the implant from other CT data of the skull, modeling of the implant geometry, 3D printing of the skull model and resection templates, virtual surgical planning and installation of the prosthesis. As well as 3D printing of individualized titanium plate, pre-modeled on the basis of virtual surgical planning. Individualized solutions are another tool for the doctor that allows you to perform operations with further predictability and reliability. The results of treatment show that the CAD/CAM method allows to improve the reconstruction of defects after surgical resection. 3D printing technology provides precision in preoperative surgical modeling and fabrication of individualized structures for osteosynthesis. Thus, the CAD / CAM method significantly reduced the time of bone graft design and manufacture, achieved clean resection edges, and improved aesthetic and functional postoperative results. The obtained results allow to optimize the surgical treatment of patients with fibrous dysplasia, to introduce into practice the latest technologies that significantly improve the quality of life, medical rehabilitation and social adaptation of patients.

fibrous dysplasia,individualized titanium plate,virtual surgical planning,СAD/CAM technology.

1. Guk YuM, Kincha – Polishchuk TA, Zima AM, Oliynyk YuV. Structural and functional state of bone tissue in fibrous dysplasia. Problems of osteology. 2014;3:47-53.
2. Park SK, Lee IS, Choi JY, Cho KH, Suh KJ, Lee JW, et al. CT and MRI of fibrous dysplasia of the spine. Br J Radiol. 2012;85(1015):996- 1001. Available from: http://Doi:10.1259/bjr/81329736.
3. Leiggener CS, Krol Z, Gawelin P, Buitrago-Téllez CH, Zeilhofer HF, Hirsch JM. A computer-based comparative quantitative analysis of surgical outcome of mandibular reconstructions with free fibula microvascular flaps. J Plast Surg Hand Surg. 2015;49(2):95-101. Available from: https://Doi:10.3109/ 2000656X.2014.920711.
4. Wijbenga JG, Schepers RH, Werker PM, Witjes MJ, Dijkstra PU. A systematic review of functional outcome and quality of life following reconstruction of maxillofacial defects using vascularized free fibula flaps and dental rehabilitation reveals poor data quality. J Plast Reconstr Aesthet Surg. 2016;69(8):1024-1036. Available from: http://Doi.10.1016/j.bjps.2016.05. 003.
5. Hidalgo DA, Rekow A. A review of 60 consecutive fibula free flap mandible reconstructions. Plast Reconstr Surg. 1995;96(3):585-602.
6. Wei FC, Santamaria E, Chang YM, Chen HC. Mandibular reconstruction with fibular osteoseptocutaneous free flap and simultaneous placement of osseointegrated dental implants. J Craniofac Surg. 1997;8(6):512-521. Available from: http://Doi:10.1097/00001665- 199711000-00018.
7. Ferri J, Piot B, Ruhin B, Mercier J. Advantages and limitations of the fibula free flap in mandibular reconstruction. J Oral Maxillofac Surg. 1997;55(5):440-449. Available from: http://Doi:10.1016/s0278-2391(97) 90685-6.
8. Ritschl LM, Kilbertus P, Grill FD, Schwarz M, Weitz J, Nieberler M, et al. In-House, Open-Source 3D-Software-Based, CAD/CAM-Planned Mandibular Reconstructions in 20 Consecutive Free Fibula Flap Cases: An Explorative Cross-Sectional Study With Three-Dimensional Performance Analysis. Front Oncol. 2021;11:731336. Available from: http://Doi:10.3389/ fonc.2021.731336.
9. Seruya M, Fisher M, Rodriguez ED. Computer-assisted versus conventional free fibula flap technique for craniofacial reconstruction: an outcomes comparison. Plast Reconstr Surg. 2013;132(5):1219-1228. Available from: http://Doi:10.1097/PRS.0b013e3182a3c0b1.
10. Abula A, Yushan M, Ren P, Abulaiti A, Ma C, Yusufu A. Reconstruction of Soft Tissue Defects and Bone Loss in the Tibia by Flap Transfer and Bone Transport by Distraction Osteogenesis: A Case Series and Our Experience. Ann Plast Surg. 2020;84(5S(3)):S202-S207. Available from: http://Doi:10. 1097/SAP.0000000000002367.
11. Rustemeyer J, Sari-Rieger A, Melenberg A, Busch A. Comparison of intraoperative time measurements between osseous reconstructions with free fibula flaps applying computer-aided designed/computer-aided manufactured and conventional techniques. Oral Maxillofac Surg. 2015;19(3):293-300. Available from: http://Doi:10.1007/s10006-015-0493-6.

«Bulletin of problems biology and medicine» Issue 3 (166), 2022 year, 137-147 pages, index UDK 616-007.246:617.52-007.61-031.4:617-089.844

10.29254/2077-4214-2022-3-166-137-147